-
How to choose material for knife gate valve
The selection of valve manufacturing materials according to different circulating media and different use environments has become the consensus of many valve manufacturers, but there are certain differences in the material selection of knife gate valves.… -
The difference between forged steel ball valve and cast steel ball valve
Forged steel ball valve refers to various forgings and forgings produced by forging methods. The quality of forged steel ball valve is higher than that of cast steel ball valve, it can withstand large impact force, and its plasticity, toughness and other mechanical properties are also higher than that of cast steel parts, so all important machine parts should use forged steel parts.… -
Torque calculation of forged steel ball valve
The working principle of the forged steel ball valve is to make the valve unblocked or blocked by rotating the valve stem.… -
What are the advantages of the three-piece forged steel ball valve?
The three-piece forged steel ball valve divides the valve body into three parts along a cross-section perpendicular to the axis of the valve passage with two valve seats, and the whole valve is symmetrical along the central axis of the valve stem.… -
Structural characteristics of flat gate valve
The flat gate valve has two floating valve seats. Each seat is designed to be sealed when the medium flows in both directions.… -
Expansion type double gate plate gate valve
Expansion type double gate plate gate valve is suitable for chemical, petroleum, natural gas, power plant, coal mine, construction, steel, light industry and sewage treatment industries.… -
Common types of flat gate valves
A parallel single-gate gate valve without diversion holes. The valve adopts the valve seat to float downstream, the spring preloads the automatic sealing structure, the opening and closing force is small, the higher the working pressure, the better the sealing performance.… -
Structural principle and performance characteristics of axial flow check valve
Axial-flow check valve should have a streamline shape on the surface of the inner cavity of the valve body, the diversion cover, the valve flap and other flow surfaces, with a rounded front and a sharp back.…