Valves are used to open and close pipelines, control the flow direction, adjust and control the parameters (temperature, pressure and flow) of the conveying medium. The valve is a control component in the fluid conveying system. It has the functions of cut-off, regulation, diversion, prevention of reverse flow, stabilization, diversion or overflow and pressure relief.…

Electric actuator is a common driving device, which can accurately control the position of the valve and is a very modern equipment. It can prevent the danger from spreading further and reduce the loss of the factory to a small amount, making it popular among the public.…

The wafer butterfly valve has simple structure, small size and light weight. The butterfly valve has two sealing types: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be inlaid on the valve body or attached to the periphery of the butterfly plate.…

Push the gasket on the sealing surface between the two flanges, align the center of the two flanges and the center of the bolt hole, insert the bolt, screw on the nut, and tighten the nut diagonally several times with even force. The bolt extends out of the nut The length of 2-3 pitches is appropriate…

The function of non-return valve is to limit the flow of fluid through it one direction.They are also called check valves.They may be manually operated or may be automatic operated.Automatic valves are designed for particular pressure, when pressure (of fluid) exceeds that limit , valve opens allowing the fluid to flow through it.…

Gate ValveIn gate valve, a gate slides between the seats of the valve. Movement of the gate is at right angle to the flow of fluid. By opening the valve, flow path is enlarged in a highly non-linear manner with respect to percentage of opening.Gate valve is normally used for isolation application where only fully close or fully open position is required. …

There are five types of cryogenic valves that are ideal for cryogenic media. Each of these types has its own set of characteristics that make them suitable in some applications and unsuitable in others. 1.Globe Valves.  Called such due to their spherical shape, these valves have an internal movable disc -- the obturator -- that rotates at 90 degrees to the plane of its coordinated body seat.…

According to the ball valve material, can be divided into stainless steel ball valve, cast steel ball valve, alloy steel ball valve etc.…