-
Installation and maintenance of self-operated pressure regulating valve
Self-operated pressure regulating valve does not need external energy, uses the energy of the medium to be adjusted as the power source, introduces the actuator to control the position of the valve core, changes the pressure difference and flow at both ends, and stabilizes the pressure before the valve (or after the valve).… -
Principle and characteristics of electronic double-seated electric regulating valve
The electronic double-seat electric regulating valve realizes pressure compensation and valve shut-off by using two sealing lines on the valve core barrel to seal at the same time.… -
What Is An Eccentric Plug Valve?
There is a wide range of valves available in the market for different purposes and applications. But when it comes to handling liquids with suspended solids, there is no better option than the Eccentric Plug Valves.… -
Double Block and Bleed Ball Valve (DBB)
Double Block and Bleed Ball Valve: DBB Ball Valve is a combination of one or more block/isolation ball valves, and one or more bleed/vent valves, usually ball or needle valves. … -
Threaded Connection Of Plug Valve
The accumulation of slag, dirt or any foreign matter in the pipeline may hinder the working efficiency of the plug valve and seriously damage the key parts of the valve.… -
V Port Ball Valve
V-shaped ball valve is a kind of ball valve. Its closing part is a V-shaped opening on the hemisphere.… -
The use of Monel in valves
Monel alloys, cast nickel alloys, Hastelloy, etc. are all materials used to manufacture special purpose valves. Nickel Alloy: Also known as Monel alloy, it is an alloy made of metal nickel as a matrix by adding copper, iron, manganese and other elements.… -
The installation and maintenance of safety valve should pay attention to the following matters
The safety valve is a special valve that is in a normally closed state under the action of external force. When the pressure of the medium in the equipment or pipeline rises beyond the specified value, it discharges the medium to the outside of the system to prevent the medium pressure in the pipeline or equipment from exceeding the specified value…